top of page

Fusion Track

ACCURATE 3-DIMENSIONAL MAPPING OF UNDERGROUND PIPE INSTALLATIONS

Fusion Track

Accurately maps location of installed pipe products. Fusion-Track Gyro can be pulled through drill pipe, pipelines and utility installations.

Can be run through steel pipe, not affected by magnetic interference. Fusion-Track pull through survey can take less than 1 hour to perform.

Provides End Users an accurate verification of installed product location.

 

ALTERNATIVE APPROACH TO GYRO REQUIRED HDD PROJECTS

 

  1. Complete your Gyro Required project using proven Grid/Tru-Track tools/methods.
  2. Run a Fusion-Track survey Post Installation for confirmation of product location.
  3. Avoids damage due to strikes during future drilling/installations.

 

SUPPORT:

 

D&S does not just supply a product, we supply a solution. It’s our job to ensure the D&S product on your job, is providing service all the time. If leased to a HDD Directional Company, Rig Drilling Contractor, or Rig Owner, should service with a probe be interrupted for any reason we provide a rapid swap out to your location anywhere in the USA.

 

 

TRAINING:

 

With any technology, training is critical for optimal operation. D&S provides in-depth training carried out by experienced operators.

 

 

TECHNICAL SUPPORT:

 

D&S is there to help with your queries or technical support requirements. From basic tool operation to data analysis and quality, we will work with you to ensure your data and project confidence is delivered.

 

 

FUSION-TRACK SPECIFICATIONS:

 

Accuracy

 

  • Inclination: +/- 0.05°
  • Precision: <1Ft per 1000 Ft Surveyed (Continuous Mode)
  • Operating: -90° to +90°**

 

Surface Setup

 

  • Warm up Time: 45 sec Downhole Travel (Continuous Mode)
  • Angular Rate: 200° per second rotation
  • Velocity (continuous survey) :200m/min (656ft/min)
  • Manual depth input
  • Wireless depth integration (AMT Electronic Depth Counter)

 

Battery

 

  • Re-chargeable Li-ion, 5000 mAh
  • 12 hours continuous operation
  • Temperature: -10°c to +70°c (14°F to 158°F)
  • Shock: 1000g Axial, ½ sine, 1ms
  • Pressure Rating: 4000psi

 

Dimensions

 

  • Outside Diameter: 35.85mm (1.41”)
  • Memory System Length: 1,403.35mm (55.25”)

 

bottom of page